Drizzle
Contrasting mineral granules are scattered across the wet face mix before pressing, then locked in during curing. The result is a speckled, two-tone surface that hides everyday dust and wear while adding visual depth to large paved areas.
Surface Engineering
Finishes Library
Every EGYCRETE paver leaves the plant with an engineered surface. This library explains how each finish is produced and where it performs best.
Standard Paver Finishes
Production finishes available across the standard interlock and paver range.
Reflective
Light-reflecting aggregates are blended into the face layer so the surface captures and diffuses sunlight and ambient light. It creates a refined shimmer and improves visibility - the same technology behind our LUMINEX pavers.
Shotblast
After curing, the surface is blasted with fine steel shot to strip away the thin cement skin and expose the aggregate beneath. This produces a uniformly rough, matte texture with excellent slip resistance for ramps, plazas, and pool surrounds.
Washed
The top layer of cement paste is washed away before the block fully hardens, revealing the natural stones of the aggregate mix. The exposed-aggregate texture is naturally slip-resistant and gives each paver an organic, stone-garden character.
Multi Color
Two or more pigmented face mixes are blended in controlled proportions during pressing, so every paver carries a unique variegated pattern. Laid across a full area, the colors flow together for a rich, natural-stone appearance.
GRANIX™ Finishes
Granite-aggregate surface treatments exclusive to the GRANIX™ collection.
Washed
The GRANIX™ granite-aggregate face is washed before full curing to expose the crushed granite grains. The finish keeps the stone's natural color play while adding a textured, slip-resistant surface for outdoor terraces and walkways.
Curling
A rotating brush treatment sweeps soft, wave-like ripples across the granite face while it is still workable. Curling softens the surface sheen into a gentle directional texture that feels natural underfoot and diffuses glare.
Honed
The cured face is ground perfectly flat with diamond abrasives, then finished to a smooth satin sheen that reveals the granite aggregate like polished terrazzo. Honed GRANIX™ is the signature finish for premium plazas and commercial frontages.
Split
Each unit is mechanically split so the face breaks along the natural structure of the granite aggregate, leaving a riven, quarry-cut texture. Split GRANIX™ delivers the character of hand-cut stone with the consistency of precast concrete.
Shotblast
Steel-shot blasting opens the granite face to a fine, even roughness that maximises grip without dulling the stone's color. The go-to GRANIX™ finish for high-traffic public spaces, slopes, and waterfront promenades.
Specify the Right Finish
Our engineers can advise on the best finish for your traffic load, climate, and design intent.
Request a Quote